跳到主要內容區塊
賀!本系96學年度起通過【工程及科技教育認證】

材料工程學系

電化學製程暨尖端材料實驗室

電化學製程暨尖端材料實驗室

大同大學材料工程學系

位置:新德惠大樓203

負責教師:胡家榮老師

 

 

 

聯絡電話:

02-2182-2928#6228

 

           研究設備

 

                微弧氧化設備示意圖

 

 

           Mitutoyo SJ-201表面粗度計

 

 

Fischer Isoscope MP10E渦電流感應式膜厚儀

 

       Spex 8000D Miller球磨機 (1720 rpm)

 

 

 

 

 

研究成果:

  1. Preparation of ceramic coatings on an Al-Si alloy by the incorporation of ZrO2 particles in microarc oxidation
  2. Wear and Corrosion Resistance of Pure Titanium Subjected to Aluminization and Coated with a Microarc Oxidation Ceramic Coating
  3. Preparation of Hydroxyapatite-Containing Coatings on Pure Titanium by Linearly Increasing the Voltage in the Pulsed Bipolar Microarc Oxidation Process
  4. Effect of Annealing at Oxygen Partial Pressure on the Conductivity of Ni0.5Mn2.5O4 Oxides
  5. Study on Wear Resistance of AISI 304 Stainless Steel Arc-coated TiN/CrN Multilayer Films
  6. Self-lubricative Coatings Deposited by Micro-Plasma Oxidation on 7075-T6 Aluminum Alloys in the Solution of Aluminate/Molybdenum Disulfide
  7. Formation of Co-Fe-M-B (M=Zr, Ti) Amorphous Powders by Mechanical Alloying and Their Magnetic Properties
  8. Synthesis of Mg-Cu-Ti Based Amorphous Alloys by Mechanical Alloying Technique
  9. Effect of Composition and Heat Treatment on the Phase Formation of Mechanically Alloyed Cr-B and Mo-B Powders
  10. Formation and Magnetic Properties of Co-M-Ti-B (M=Fe, Nb) Amorphous Powders by Mechanical Solid-State Reaction
  11. 機械合金法合成鎂-鎳基非晶合金研究
  12. 機械合金法合成Cu-Ti三元及四元非晶合金粉末及塊狀成型研究